Feature
· 1. Single-symbol correction or double-bit correction per codeword.
·
2. Correction of one failed x4 chip per sub-channel.
·
3. 80-bit codeword containing 64 data bits and 16 parity bits.
·
4. Ten 8-bit symbols with GF(2^8) arithmetic.
·
5. Shared syndrome generator with separate symbol and double-bit correction paths.
·
6. One-cycle detection of error presence.
Application
· 1. CXL memory subsystems.
·
2. DDR5 memory controllers.
·
3. Reliable memory systems for AI accelerators
Business Area
Semiconductor IP, memory controllers, and AI accelerator hardware.
Category
Memory Controller & PHY > DDR
Interface Controller & PHY
Comumnication > Wireline > Error Correction/Detection
Tech Specs
-
IP Name :
CMSS (CXL Memory Sub-System) ECC IP
-
Provider :
Scalable Architecture Lab, Sungkyunkwan University (SKKU)
-
FPGA Device :
Intel Agilex 7 M-Series AGMA039R47A1E2VC, BittWare IA-860m
-
Foundry :
N/A
-
Technology :
FPGA
Deliverables
· ECC encoder implementation for generating an 80-bit codeword from 64 data bits and 16 parity bits.
·
·
ECC decoder implementation comprising a shared syndrome generator, a single-symbol corrector, a double-bit corrector, and an output decision block.
·
·
C++ reference model implementing finite-field syndrome calculation, error-pattern identification, correction, and decoding-result classification.
·
·
Fault-injection simulator supporting single-bit errors, double-bit errors, chip failures, and configurable combinations of faults.
·
·
Build and execution scripts for selecting fault scenarios and on-die and rank-level ECC configurations.
·
·
IP datasheet describing codeword organization, correction capability, functional blocks, logical data interfaces, and encoding and decoding flows.
Validation Status
· Hardware functional simulation confirms correction of injected double-bit errors through the syndrome generation, correction, and output selection paths.
·
·
The C++ fault-injection model evaluates error behavior using the configured DDR5 x4 chip organization and codeword mapping.
·
·
Decoded data are compared with the original data to classify correctable errors, detectable uncorrectable errors, and silent data corruption.
·
·
Single-symbol correction covers errors confined to one 8-bit symbol; double-bit correction covers two erroneous bits, including errors in different symbols.
·
·
External verification confirmed two-chip correction capability, corresponding to one failed x4 chip in each of two independently protected sub-channels.
Availability
Available for evaluation and integration into CXL memory subsystems.
Benefits
· Provides single-symbol correction or double-bit correction within each codeword, covering both chip-related faults and scattered bit errors.
·
·
Recovers data from one failed x4 DRAM chip per sub-channel by organizing two beats from each chip into one 8-bit symbol.
·
·
Extends bit-error correction capability by assigning otherwise unused Reed–Solomon syndromes to double-bit error patterns, without increasing rank-level parity.
·
·
Shares syndrome generation between the symbol and double-bit correction paths, allowing both paths to use the same codeword checks.
·
·
Provides bit-error protection at rank level without requiring on-die ECC to perform that protection function.
·
·
Detects the presence of an error in one clock cycle, independently of the complete correction latency.